Welcome to Diploma Mechanical Engineering

The Mechanical Engineering Department has grown considerably since its establishment in 2012 with intake rising from 60 to 120. We always intend to impart knowledge through a close-knit family of highly competent, highly qualified, capable, mature and dedicated faculty members. Department of mechanical engineering plays a vital role in an engineering college catering to the teaching of mechanical courses for engineering students. Our laboratories have been very well established not only to cover complete syllabus but to motivate students to learn beyond the syllabus, which definitely develops complete knowledge of the subject and develop skills of students to become promising engineers in future.

More Info...

Vision

To empower students with practical, technical, social skills and engineering problem solving, for enlighting the society, help in nation building and to achieve the current requirement of Industry.

Mission

M1: To educate the student by providing them fundamental knowledge of mechanical engineering, practical skills and by collaborating with industry.
M2:To educate, prepare, inspire and mentor student.

Prof. Nitin Vijay Galwade

HOD, Diploma Mechanical

Its my pleasure to head Mechanical Engineering Department (Diploma Section). We have a strong diploma program in Mechanical Engineering and has considerable growth since its introduction in 2012 with intake rising from 60 to 120. We always intend to impart knowledge through a close-knit family of highly competent, highly qualified, capable, mature and dedicated faculty members. Department of mechanical engineering plays a vital role in an engineering college catering to the teaching of mechanical and humanities courses for engineering students. Our laboratories have been very well established not only to cover complete syllabus but to motivate students to learn beyond the syllabus which definitely develops complete knowledge of the subject (both the practical and theoretical depth of knowledge) and develop skill sets of students to become promising engineers in future. The diploma degree holders play a very improrant and vital role in the industrial and economic development of country. I would like to conclude with the words of Thomas Friedman who has rightly opined "World is flat opportunities are immense. Its just a question of identifying opportunities and making the best of them". I wish very best to all my dear mechanical engineering students.

Designation:Lecturer
Qualification:M.TECH, B.TECH
Area of Interest:
Email:furqan.hassan@theemcoe.org
Designation:Asst Professor
Qualification:M.E., BE
Area of Interest:
Email:
Designation:Lecturer
Qualification:M.E. THERMAL (APPEAR), BE MECH
Area of Interest:
Email:nitin.galwade@theemcoe.org
Designation:Lecturer
Qualification:BE MECH
Area of Interest:
Email:
Designation:Asst Professor
Qualification:M.TECH (CAD/CAM), BE MECH
Area of Interest:
Email:layak.sayyad@theemcoe.org
Designation:Lecturer
Qualification:BE MECH
Area of Interest:
Email:
Designation:Lecturer
Qualification:ME MPE (APPEAR), BE MECH
Area of Interest:
Email:suraj.wankhade@theemcoe.org
Designation:Lecturer
Qualification:BE MECH
Area of Interest:
Email:mujeeb.shaikh@theemcoe.org
Designation:Lecturer
Qualification:BE MECHANICAL
Area of Interest:
Email:
Designation:Lecturer
Qualification:B.E
Area of Interest:
Email:

Non-Teaching Staff

Designation:Lab Assistant
Qualification:M. Sc.
Designation:Lab Assistant
Qualification:B. Sc. (I.T.)

  Name of Lab                       Description

FLUID MECHANICS
View Lab
FLUID MECHANICS LAB IS DESIGNED BY MSBTE TO CLEAR THE PRACTICAL CONCEPT OF STUDETNS IN FLUID MECHANCIS AND MACHINARY SUBJECT WHICH IS IN FOURTH SEM OF MSBTE CURRUCULUM. IN THIS LAB WE PERFORM THE PRACTICALS ON DIFFERENT INSTRUMENTS SUCH AS VENTURIMETER, ORIFICEMETER,BERNAULLIS THEOREM,DARCYS FRICTION FACTOR SET UP, MINOR LOSSES IN PIPE FITTINGS SET UP, CENTRIFUGAL PUMP TEST RIG, RECIPROCATING PUMP TEST RIG, PELTON WHEEL TURBINE TEST RIG, FRANCI'S TURBINE TEST RIG, KAPLAN TURBINE TEST RIG.
REFRIGERATION AND AIR CONDITIONING
View Lab
REFRIGERATION AND AIR CONDITIONING IS AN ELECTIVE SUBJECT AND PRACTICALS OF THIS SUBJECT IS CONDUCTED ON THE REFRIGERATION AND AIR CONDITIONG LAB AND OUR LAB IS FULLEY EQUIPPED WITH ALL THE INSTRUMENTS AS PER THE MSBTE CURRICULUM REQUIREMENT IN THIS LAB WE CONDUCT THE PRACTICAL ON DIFFERENT INSTRUMENTS TO CLEAR THE BASIC THEOROTICAL CONCEPT OF STUDENTS SUCH AS AIR CONDITIONING TEST RIG, WATER COOLER TEST RIG, ICE PLANT TEST RIG, VAR TEST RIG, REFRIGERATION TEST RIG , MECHANICAL HEAT PUMP TEST RIG.
STRENGTH OF MATERIAL
View Lab
STRENGTH OF MATERIAL LAB IS FULLY EQUIPPED WITH ALL THE INSTRUMETNS WHICH IS BEING DESIGN BY MSBTE. IN THIS LAB WE PERFORM THE VARIOUS PRACTICALS BY USING THE FOLLOWING INSTRUMENTS SUCH AS UTM MACHINE , TORSION TESTING MACHINE , HARDNESS TESTING MACHINE , EXTENSOMETER,IMPACT TESTING MACHINE , BY USING ALL SUCH INSTRUMENTS WE CONDUCT THE PRACTICLS MSBTE THIS LAB IS ALSO SPECILLAY DESIGNED BY CONSIDERING THE SAFETY OF STUDENTS AS THE MACHINARY IS VERY HEAVY.
AUTOMOBILE ENGINEERING
View Lab
OUR AUTOMOBILE LAB IS IN COLLABARTION WITH NAVNEET MOTORS IN THIS LAB WE CONDUCT THE PARACTICALS OF SUBJECT AUTOMOBILE ENGINEERING IN FIFTH SEM OF MSBTE CURRICULUM IN AUTOMOBILE LAB WE HAVE MORE EQUIPMENTS THAN OUR REQUIREMENT THE LAB IS FULLY EQUIPPED IN COLLABATION WITH NAVNEET MOTORS. WE DO THE ASSEMBLY AND DIASSEMBLY OF DIFERENT ENGINE TO CLEAR OUT THE PARTWISE SPECIFICATION OF ENGINE IN BATCH WISE .
THERMAL ENGINEERING
View Lab
THERMAL ENGINEERING LAB IS DESIGNED TO CONDUCT THE PRACTICALS OF THERMAL ENGINEERING SUBJECT WHICH IS IN THIRD SEM OF MSTBE CURRICULUM AND THE LAB IS FULLY EQUIPPED WITH ALL INSTRUMETNS AS PER THE REQUIREMENT OF MSBTE . IN THIS LAB WE PERFORM THE PRACTICALS ON DIFFERENT INSTRUMENTS TO CLEAR THE BASIC CONCEPT OF STUDENTS SUCH AS DIFFERENT MODEL OF BOILERS TO CLEAR THE INNER CROSS SECTION OF BOILER OR DIFFERENT PARTS OF BOILER , HEAT EXCHANGER SET UP , AND THERMAL CONDUCTIVITY SET UP.
WORKSHOP
View Lab
WORKSHOP IS FULLY EQUIPPED WITH ALL THE INSTRUMENTS IN VARIOUS SECTIONS SUCH AS WELDING ,CARPENTORY, MACHINE SHOP, FITTING SHOP , AS PER THE MSBTE REQUIREMENT WORKSHOP IS REQUIRED TILL FINAL YEAR IN FIRST YEAR AND SECOND YEAR TO COMPLETE THE MSBTE PRACTICALS AND IN FINAL YEAR TO COMPLETE THE PROJECT WORK. OUR WORKSHOP IS FULLY EQUIPPED WITH 20 NUMBERS OF 4/12 LATHE MACHINES, MILLING MACHINE , SHAPING MACHINE, AND ALSO DIFFERENT TOOLS ARE AVAILABLE TO CONDUCT THE PRACTICAL.
I.C. ENGINE. LAB
View Lab
IN IC ENGINE LAB WE CONDUCT THE PRACTICALS ON VARIOUS TEST RIG SUCH AS MORSE TEST WHICH CONDUCTS ON 4-STROKE PETROL ENGINE, HEAT BALANCE SHEET WHICH PERFORMS ON 4-STROKE DIESEL ENGINE, DISMANTLING AND ASSEMBLY OF PETROL ENGINE/ DIESEL ENGINE TO CLEAR THE BASIC CONCEPT OF STUDENTS . ALSO WE CONDUCT PRACTICAL ON TWO STAGE RECIPROCATING AIR COMRESSOR WITH THE HELP OF RECIPROCATING AIR COMPRESSOR TEST RIG.
CNC MACHINES
View Lab
IN CNC LAB WE HAVE BASICALLY TWO MAJOR MACHINES TO CONDUDCT THE PRACTICAL OF SUBJECT COMPUTER NUMERICAL CONTROLL WHICH IS IN 5TH SEM OF MSBTE CURRICULUM IN WHICH WE CONDUCT SIMULATION OF JOB ON CIMCO SOFTWARE IN CAD/CAM LAB AFTER SIMULATION WE CONDUCT THE INDIVIDUAL JOB OF SAME PROGRAMM ON LEADWELL CNC LATHE MACHINE AND LEADWELL CNC VERTICAL MILLING MACHINE .TO CLEAR OUT THE PRACTICAL PROGRAMMING CONCEPT OF STUDENTS.
MECHANICAL MEASUREMENT AND METROLOGY(QUALITY CONTROL))
View Lab
MECHANICAL MEASUREMENT AND CONTROL SUBJECT IS DESIGNED FOR MECHANICAL ENGINEERING STUDENTS IN FIFTH SEM OF MSBTE CURRCULUM. IN THIS LAB WE CONDUCT THE PRACTICAL ON DIFFERENT INSTRUMENTS TO CLEAR THE BASIC CONCEPT OF STUEDENTS WE USE THE FOLLOWING INSTRUMENTS LIKE LVDT DEMONSRATOR KIT , DEAD WEIGHT TESTER, SINE BAR , INSIDE MICROMETER , MEASURE FORCE OR WEIGHT BY USING LEAD CELL, MEASURE LIQUID LEVEL BY CAPACITIVE TRANSDUCER SYSTEM , MEASURE FLOW OF LIQUID BY USIGN ROTAMETER. ALSO MESURE TEMPRATURE BY USING THERMOCOUPLE AND VERFYING BY THREMOMETER.
INDUSTRIAL FLUID POWER (MECHATRONICS)
View Lab
IN INDUSTRIAL FLUID POWER SUBJECT IS IN 6TH SEM OF MSBTE CURRICULUM IN THAT WE CONDUDCT THE PRACTICAL ON DIFFERENT EQUIPMENTS SUCH AS PNEUMATIC TRAINER KIT, HYDRAULIC TRAINER KIT, AND PLC TRAINER KIT TO CLEAR THE BASIC CONCEPT OF HYDRAULICS AND PNEUMATICS. ASLO WE CONDUCT THE SOME INDUSTRIAL VISIT TO TO SOME CRANE SERVICE INDUSTRIES , JCB WHERE THE MAXIMUM USE OF HYDRAULIC SYSTEM IS USED TO UNDERSTAND THE MAIN WORKING OF HYDRAULIC AND PNEUMATIC SYSTEM.
THEORY OF MACHINE
View Lab
THEORY OF MACHINE LAB IS DEISGNED TO CONDUCT THE PRACTICALS OF THEORY OF MACHINE SUBJECT WHICH IS IN THE MSBTE CURRICULUM IN FOURTH SEMESTER IN THIS WE PERFORM THE PRACTICALS BY USING DIFFERENT INSTRUMENTS TO CLEAR THE BASIC THEOROTICAL CONCEPT IN THIS LAB FOLLOWING INSTRUMENTS ARE USED TO CONDUCT THE PRACTICALS QUICK RETURN MOTION MECHANISM VARIOUS LINK AND MECHANISM , IC ENGINE SLIDER MECHANISM, GOVERNERS AND FLYWHEELS, BRAKES AN CLUTCH MECHANISM, AND COUNTER BALACNE MASS SET UP.
MECHANICS
View Lab
APPLIED MECHANICS LAB IS SPECIALLY DESIGNED TO CONDUCT THE PRACTICALS OF MECHANCIS SUBJECT WHICH IS BEING DESIGNED FOR FIRST YEAR MECHANICAL ENGIEERING STUDENTS IN SECOND SEM THIS LAB IS WELL EQUIPPED AS PER THE MSBTE REQUIREMENT THIS LAB CONSISTS OF FOLLOWING LAB INSTRUMENTS DIIFERENTILA AXEL AND WHEEL, SINGLE PURCHASE CRAB, WESTONS DIFFERENTIAL PULLEY BLOCK, POLYGON FORCE APPRATUS, SIMPLY SUPPORTED BEAM APPRATUS, FRICTION SLIDE APPRATUS, SIMPLE SCREW JACK APPRATUS.
BASIC ELECTRONICS & MECHATRONICS
View Lab
BASIC ELECTRONICS AND MECHATRONICS LAB IS DESIGNED TO CONDUCT THE PRACTICALS OF SAME SUBJECT WHICH IS IN THIRD SEM OF MSBTE CURRICULUM. IN THIS LAB WE PERFORM THE PRACTICALS ON VARIOUS INSTRUMENTS TO CLEAR THE GENERAL BASIC CONCEPTS OF STUDENTS. WE CONDUCT THE PRACTICALS ON CRO'S FUNCTION GENERATOR ALSO THE VARIOUS KITS ARE AVAILABLE TO PERFORM THE PRACTICALS.
ELECTRICAL ENGINEERING
View Lab
ELECTRICAL ENGINEERING IS A SUBJECT WHICH IS BEING DESIGNED BY ,MSBTE IN FOURTH SEM FOR MECHANICAL ENGINEERING STUDENTS IN ELECTRICAL ENGINEERIGN LAB WE PERFORM THE VARIOUS PRACTICALS BY USING FOLLOWING INSTRUMENTS STEPDOWN TRANSFORMER , AUTO TRANSFORMER, THREE PHASE MEASUREMENT SYSTEM , DIGITAL MULTIMETER, WATT METER, VOLT METER , ENERGY METER,TACHOMETER.
CAD/CAM LAB
View Lab
THE MECHANICAL ENGINEERING DEPARTMENT HAS THE COMPUTER AIDED DESIGN LAB DEDICATED WITH 24 PCS WITH ONE LCD PROJECTOR ARE AVAILABE WTH DESIRED CONFIGURATION CAD CAM LAB SOLID WORK,S AND CIMCO SOFTWARE PRACTICAL ARE CONDUCTED AS WELL AUTOCAD AND SOME PEROJECT WORK OF STUDENT IS ALSO COMPLETE

Notice Board

  • Publications by Staff
  • Galwade Nitin Vijay

    Presented a paper entitled "Design And Fabrication O Vortex Tube" in "IC DMT 2018" in Feb - 2018

  • Dubey Santosh Subhashchandra

    Published a paper entitled "Literature Review On Implementation O0f Total Quality Management" in "IRJET" in Feb - 2017

  • Abdul Nadeem Abdul Basit

    Published a paper entitled "Advance Heat Ventillation And Air Conditiong System" in "IJESC" in Sept - 2017

  • Sayyad Layak Babamiya

    Published a paper entitled "An Overview Of Knowledge Based Engineering And Computer Aided Design In Product Developement" in "IJMRA" in Feb - 2017

  • Wankhade Suraj Sudamji

    Published a paper entitled "Vibartion Analysis Of And Experimentation Of Centrfugal Pump Impeller" in "IJSRD" in Aug - 2016

  • Ansari Zaid Ahmad Jaliluddin

    Published a paper entitled "Solar Tricycle With Solar Tracking System" in "IJSRD" in Dec - 2016

  • Students Achievements
  • Aditya Sunil Patil won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Asanohammed Riyasat Shah won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Salauddin Sabirali Chaawdhary won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Khan Akban Rfaraz won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Tanzil Siddiqui won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Satish Singh won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Mahesh Chand won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Ajhar Ansari won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Tribhuvan Bharati won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Araslan Ayaz Shaikh won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Parth Parmar won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Khan Shahnawaz won in event Science Fest-2018 held at St.john College Of Engieering And Nagement in 2017-2018

  • Yadav Shailendra, Maurya Akhilesh, Singh Vikas, Singh Anilkumar won First Prize in event Msbte Sponsored State Level Project Exhibition held at St John College Of Engineering Palghar in 2017

Departmental Gallery